Relay Dual Output Module with SCI NITTAN EVA-DOP-SCI

Relay Dual Output Module with SCI NITTAN EVA-DOP-SCI
– EVA-DOP-SCI Dual Output Module with Short Circuit Isolator is an addressable dual output module that provides two dry contacts. The contact rating is 2A at 30 VDC. The status of each dry contact is monitored and controlled by a control panel.
– Two Form-C relay contacts.
– Swithing capacity 2A@30VDC each.
– SCI function.
– Status indicator LED.
– Address settable from 001 to 254 by a dedicated programmer.
– Single loop address.
– Low standby current (0.6mA).
– SEMS screws for easy wiring.
– Mounts to optional 4-inch square electrical box.
Thông số kỹ thuật

Model

EVA-DOP-SCI

SLC Applied Voltage

Rated Range 20 to 38 VDC

SLC Current Consumption

Standby 0.6 mA
Activated 3.3 mA (max)

SLC Line Impedance

Up to 50 Ω

Relay (Programmable)

Switching Capacity 2 A@ 30 VDC

SCI On Resistance

0.2 Ω (max)

SCI Fault Detection Threshold

10V (min)

SCI Isolation Current

22 mA (max)

Visual Indicator (Status LED)

Polling LED (GREEN)
Output LED (RED)
SCI LED (YELLOW)

Ambient Installation Temperature

0 °C to 49 °C (32 °F to 120 °F)

Storage Temperature

-20 °C to 60 °C (-4 °F to 140 °F)

Max Relative Humidity

Up to 93 % RH, non-condensing

Environment

Indoor dry use only

Max quantity per loop

127 units

Terminal

Screw AWG12 to 22

Address Setting

EVA-AD2 Address Programmer

Dimensions

H 124 mm x W 124 mm x D 34.5 mm

Weight

Approximately 167 g

Conformity

UL864