GST-IFP8: Trung tâm báo cháy 8 Loop (10 Loop)

– Technical Specification
– Standard :4 Part 2/4 ; BS5839 Part 4
– Approvals :LPCB
– Main Input Voltage:0 ± 10% VAC 50/60 Hz
– Input Current Rating:1Amphere
– System Operating Voltage: 4 VDC Nominal (20-27 VDC)
– Loop Capacity:p 10:242- Address per loop
– Loop Topology :class A and Class B
– Zone Capacity:999 Zones programmable
– Sounder Circuits (3):
+ fire Routing: 200mA /24Vdc/4.7KΩ EOLR
+ F.P.E. Output: 500mA /24Vdc/4.7KΩ EOLR
+ Sounder Circuit Output: 1A /24Vdc/4.7KΩ EOLR
+ Dry Contact: Optional C-9302 module
– Fuses :Mains 2A (20mm A/S ceramic)
– Common Fault Relay Output:volt-free changeover 1.0A at 24 VDC
– 24 VDC Fused Output :maximum load 500mA at 17-28VDC
– Standby Batteries:twin 12 Vdc Bat;38AH
– Battery Charging Current Limit :2A/24Vdc

Selection of GST-IFP8 compatible addressable devices and Panels

– GSTGMC Colour Graphic and Display System
– GST200-2/N Fire Alarm Panel
– GST5000W/2/4 Intelligent Fire Alarm Controller
– GST5000R/C 1-20 Loops Intelligent Fire Alarm Controller
– GSTGMC Graphic Monitor Software
– GST-NRP01 Network Repeater Panel
– GST852RP LCD Passive Repeater Panel
– GST8903 Mimic Panel
– DI-910N Digital Intelligent Detector Series
– DI-920N Digital Manual Call Point Series
– DI-9400 Addressable Sounder Series
– I-910N Intelligent Analogue Detector Series
– I-9202 Addressable Manual Call Point Series
– I-9300 Addressable Series interfaces (Complete range for all requirements)
– I-9400 Addressable Series Sounders and strobes
– I-9600 Intelligent Series Combustible gas detectors