Cảm biến phát hiện lửa và chuyển động TAKEX FP-2500E

Cảm biến phát hiện lửa và chuyển động TAKEX FP-2500E

– A combination UV flame sensor and wide-angle PIR with up to 10m flame and intrusion detection for safer indoor protection of your premises.

– High sensitivity ultraviolet flame sensor + wide angle intrusion PIR

– Dual ouput modes; AND/OR

– Forced output mode following continued flame detection

– Alarm memory function

– Multi-zone PIR technology provides pet immunity up to 20kg (40lbs)

– PIR area adjustment

– Detection timer

– Xuất xứ: Nhật Bản.

Đặc tính kỹ thuật

Flame sensor part

Detection system

Ultraviolet rays detection (185~260nm)

Detection distance

10m (33ft) max. from 7cm (2.75′) flame

Detection area angle

Approx. 120 degrees conically

Detection setting

Detection timer (1sec, 3sec)
Detection sensitivity (H: 100%, L: 50%)
Detection sensitivity can be set in ‘Individual’ (‘OR’) mode.
H: 100% is fixed in ‘AND’ mode.

Alarm LED (RED)

Part of flame sensor
Lighting at alarm (detection time + off delay Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory

Passive sensor part

Detection system

Passive Infrared

Detection area

Wide Angle 10m (33ft) Max. 29 pairs

Detection area angle adjustment

3 steps

Alarm LED (RED)

Lighting at alarm (one shot, Approx. 2 sec.)
Blinking (3 min) and Lighting (47 min) at memory
Lighting at trouble.

General

Power supply

10-30VDC (non-polarity)

current consumption

20mA Max.

Alarm output

Individual mode
Flame sensor output (From alarm terminal 1)
• Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
• Contact operation: Detection time + off delay.(Approx.2sec.)
• Contact capacity: 30V (AC/DC) 0.25AMax.(resistive load)
Passive sensor output (From alarm terminal 2)
• Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
• Contact operation: One shot (Approx. 2 sec.)
• Contact capacity:30V(AC/DC) 0.25AMax.(resistive load)
AND mode
Alarm signal outputs from alarm terminal 1, 2, when both sensors detect during the selected time.
• Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
• Contact operation: Min. 2 sec. (Max. depends on AND mode timer setting)
• Contact capacity: 30V (AC/DC) 0.25A Max.(resistive load)

Tamper output

Dry contact relay NC
(Activated when the front cover is detached)
Contact capacity: 30V (AC/DC) 0.1A Max. (resistive load)

Alarm memory

Reset after blinking (3 min) and lighting (47 min)
(Operate flame and passive LED individually)

Ambient temperature range

-15°C to +55°C (5°F to +131°F) without condensation

Mounting position

Indoor wall surface (Ceiling with option attachment “BCW-401”)

Connections

Self-up terminal

Weight

Approx. 120g

>>> Liên hệ ngay với Công ty IPCA hoặc gặp trực tiếp bộ phận kinh doanh được tư vấn và đặt hàng.

Hotline: 0914.348.397, 0975.907.336, 0983.04.88.14

Email: tuanthanh@anninh.com.vn – thanhkd.pccc@gmail.com – aninh@anninh.com.vn