Alignment wireless checker TAKEX ER-02

Bộ căn chỉnh thiết bị không dây TAKEX ER-02

– 2.4GHz bi-directional communication

– Easily disable upper or lower beams remotely during alignment

– Monitor output voltage displayed on LCD

– Self-check function ensures accurate alignment

– Xuất xứ: Nhật Bản.

Đặc tính kỹ thuật

Power supply

Supplied from PXB series sensor (10 to 30VDC) or LR6: 6pcs

Current consumption

145mA or less

Battery life

About 10 hours (continuous use)

Transmission frequency

2.4GHz (IEEE802.15.4 compliance)

Transmission output

60mW

Antenna

Dipole antenna

Radio wave arrival distance

about 200m (clear distance)

Alarm LED

Red LED (Receiver)
ON: when an alarm is initiated

Attenuation LED

Red LED (Receiver)
ON: when beam is attenuated

Ambient temperature range

35°C to +66°C
-10°C to +50°C when batteries are used

Functions

Power selection function
Power selection function
Upper/lower level selection function
Sound check function
Monitor output display function
photoreceiving level indicator function
Alarm display function
Phototransmitting/photoreceiving operation display
Self-check function
Radio wave frequency selection function
Wireless selection function
Connected model selection function (non-PXB series sensor)

Weight

320g (11.2oz) excluding batteries

Appearance

PC/ABS resin (Fluorescent yellow)

>>> Liên hệ ngay với Công ty IPCA hoặc gặp trực tiếp bộ phận kinh doanh được tư vấn và đặt hàng.

Hotline: 0914.348.397, 0975.907.336, 0983.04.88.14

Email: tuanthanh@anninh.com.vn – thanhkd.pccc@gmail.com – aninh@anninh.com.vn